Where Is The Radiator Drain Plug On A 2007 Chevy Silverado? The radiator drain plug is located at the bottom of the radiator tank passenger side facing engine on my chevy silverado.
Where is the radiator drain plug located? Hi pitina, The radiator plug is usually located at the base of the radiator and looks like a wing-nut.
When removed the entire contents of your radiator will be drained.
A radiator drain petcock is usually located above the bottom of the radiator.
So even if you can open it, you’re not draining the radiator completely.
How do you drain the coolant on a Silverado? Set a drain pan under the connection point between the lower radiator hose and the radiator.
Squeeze the tabs on the lower radiator hose’s clamp with slip-joint pliers, and slide the hose clamp about 3 inches up the hose — away from the radiator.
Pull the lower hose from the radiator, using a slight twisting motion.
What kind of antifreeze does a 2007 Chevy Silverado take? Zerex 1 Gallon Yellow 50/50 Coolant/Antifreeze.
Where Is The Radiator Drain Plug On A 2007 Chevy Silverado? – Related Questions
How do you flush transmission fluid out of a cooling system?
Install a new radiator with the trans cooler and run it with just plain water until the engine gets to normal temperature. Shut the engine down and let it cool down just enough so the oil film will be drained out with the water.
Where is the radiator drain Petcock?
The petcock is usually always located in the corner of the radiator. Once located, get a pan of some sort, such as a disposable aluminum pan from the store, and place it directly under the petcock. When in place, remove the petcock and let the coolant drain into the pan.
How do you know if you need a radiator flush?
Other signs that an immediate radiator flush is necessary includes coolant leaking underneath your car, grinding or knocking engine noise, visible debris in your coolant and steam or an odd smell rising from your hood.
Can I use vinegar to flush my radiator?
Vinegar works well in removing these culprits because it is a mild acid that is safe to use on all metals. If you don’t want to pay someone to do a radiator flush, try using vinegar to get your car’s radiator back in good running condition.
How do you burp a 5.3 Vortec?
Leave the radiator cap off, turn the engine on and let it run until the radiator “burps”: You will see the coolant level drop and may see or hear a large air bubble come to the top as the system burps.
How many gallons of antifreeze does a Chevy Silverado hold?
13.4 quarts without a/c, and 14.9 with a/c. so between 3 and 4 gallons total from empty, with 50/50 mix antifreeze and distilled water.
What kind of coolant is Dexcool?
ACDelco GM OE Dex-Cool Antifreeze Extended Life Coolant Concentrate is an orange, silicate and phosphate free, premium-grade coolant/antifreeze that is formulated with a chemical composition that minimizes breakdown of metal components in contact with the fluid.
How much does it cost for a coolant flush?
The cost of a coolant flush typically runs between $100 and $150, according to highly rated mechanics. Kauffeld says this can include four gallons of coolant, a conditioner and a cleaner. CostHelper.com estimates the cost between $54 and $144 for a radiator flush at a standard shop, with an average price of $99.
How much antifreeze does a 2007 Chevy Silverado hold?
The coolant capacity on the 2007 Chevy Silverado depends on the number of cylinders an engine has.
The V6 engine has a coolant capacity of 16.
5 US quarts.
The V8 engine has a total capacity of 16.
9 US quarts.
If You want to know what type of coolant to use then I suggest A50/50 mix of Dex-cool and water.
What can I use instead of Dex cool?
I recommend Yellow. Prestone extended life. Either 50/50 or cut it yourself with distilled. It is GM certified as a DEX Cool replacement and can be mixed with Dex Cool (don’t mix it outright, drain it, just that what does not drain out it’s ok when it intermixes).
Is Prestone coolant good for Chevy?
Yes.
Prestone’s Coolant/Antifreeze is guaranteed to be compatible with all cars, vans or light trucks.
The 1-litre bottle has an easy pour spout, and the coolant itself will work in any car, van or light truck, guaranteed.
Coolant/Antifreeze is formulated to offer a simple solution to topping up your cooling system.
What happens if you put transmission fluid in the coolant reservoir?
Transmission fluid will attack the rubber hoses and seals, making them expand, soften, and fail. A quart added to the system will wreak havoc in a hurry, and be very difficult to flush out. If you put it in the coolant reservoir; DON’T START THE ENGINE, remove the tank, and clean it thoroughly.
What happens when transmission fluid mixed with antifreeze?
The temperature of transmission fluid is regulated inside the engine cooling system. Any rupture of the internal radiator tank can allow coolant to mix with, and contaminate transmission fluid. The engine coolant can also become polluted by the transmission fluid, as the pressures of either liquid vacillate.
What happens if you put transmission fluid in your radiator?
Transmission fluid will attack the rubber hoses and seals, making them expand, soften, and fail. A quart added to the system will wreak havoc in a hurry, and be very difficult to flush out. If you put it in the coolant reservoir; DON’T START THE ENGINE, remove the tank, and clean it thoroughly.
How do you unclog a radiator drain plug?
Just pull the lower hose with the engine running and the radiator cap off. Flush it out by: reattaching hose, filling radiator, wait for thermostat to open, pull lower hose, and repeat.
What is the purpose of a radiator Petcock?
Function. The major function of the radiator drain petcock is not only to stop coolant from leaking through the hole underneath the radiator, but it serves a reverse role too. The petcock has been placed in modern cars to make draining a radiator an easy task.
How often should a radiator be flushed?
once every five years
Generally speaking, you should flush your radiator once every five years or every 100,000 miles that you drive.
