Where Can I Buy Blow Mold For Christmas Decorations?

Where Can I Buy Blow Mold For Christmas Decorations?

Where Can I Buy Blow Mold For Christmas Decorations?

Are blow mold decorations still made? Sadly, after 60 years of plastics production in the USA, the most recognized and largest U.S. maker of blow molds closed its doors in 2017. General Foam Plastics, headquartered in Virginia Beach, shut down its production facilities in Norfolk, Virginia and Tarboro, North Carolina.Nov 27, 2018

Why are Christmas blow molds so expensive? When something is rare and there is a demand for it, it’s hard to come by and often very expensive. With the rarity of well-maintained blow molds also comes the fact that some of the original companies that made these products are out of business. This makes them even more collectible.Sep 16, 2019

What companies still make blow molds? Leading Manufacturers
Western Industries Plastic Products LLC. Winfield, KS | 620-221-9464.
Blow Molded Products. Riverside, CA | 951-360-6055.
Iceberg Molding. Sturgis, MI | 269-651-9488.
Hi-Rel Plastics & Molding. Riverside, CA | 951-354-0258.
SPI Blow Molding LLC. Coloma, MI | 269-849-3200.
Kent City Plastics.

Where Can I Buy Blow Mold For Christmas Decorations? – Related Questions

Who makes blow mold Christmas decorations?

Gemmy Industries
Big-box retailers, such as The Home Depot and Walmart, have begun to sell their own blow molds. At Lowe’s, a 2-foot-tall snowman with a “nostalgic look” costs less than $40. It is produced by Gemmy Industries, of Texas, better known for inflatable decorations.Dec 22, 2020

Where can I buy blow mold decorations?

The 8 Best Places to Buy Blow Mold Yard Decorations in 2021
Amazon. Buy on Amazon. No surprise: This shopping giant offers plenty of options when it comes to these sweet decorations.
Etsy. Buy on Etsy.
Home Depot. Buy on Home Depot.
Wayfair. Buy on Wayfair.
Ace Hardware. Buy on Ace Hardware.
Walmart. Buy on Walmart.
The Jolly Christmas Shop. Buy on Thejollychristmasshop.com.
eBay. Buy on EBay.
Oct 2, 2020

How do you hold down a blow mold?

Using 2-3 plastic bags- fill the bags with gravel or heavy rocks and make sure to tie the bags tightly.
If your blow mold is propped up against a mailbox, fence, or light post, you can use twine to secure the blow mold to the fixture.
Use twine and a stake set to secure your blow mold into the ground.
•Nov 12, 2015

Does Empire still make blow molds?

Due to dramatically decreasing sales in the 90s, Empire downsized in 2001 and no longer began producing blow molds. After their purchase of Empires assets, General Foam rose to become the top manufacturer in blow molding.

How much do blow molds cost?

A single cavity, extrusion blow mold suitable to produce up to 100M units per year may cost as little as $3,000. An eight cavity, extrusion blow mold with automatic detabbing equipment may cost as much as $25,000 but may generate sufficient cost savings to return the investment within a short period.

What are blow mold Christmas decorations?

They are known by various names. Light-ups, Lawn Art, plastic kitsch, illuminated figures, or simply blow molds. Blow molding is a plastic manufacturing process.

Does General Foam still make blow molds?

The cat and pumpkin blow mold was originally created in the 1950’s and General Foam still uses the orignal Empire mold to create this decoration.

Can you paint blow mold?

If the paint on your blow mold appears faded or scratched, Sansing says you can freshen it up with plastic-friendly spray paint, such as Fusion All-in-One by Krylon ($5, amazon.com). “First, use masking tape and a precision knife to cover the sections of the mold you don’t want to paint,” she advises.Nov 16, 2020

What year did blow molds come out?

1940s
Blow molds first appeared in the 1940s and were two dimensional until the 1950s when Empire Plastics and Union started making the famous pink flamingo yard ornaments. They were cheap and easy to produce and were very popular at the local five and dime stores.Dec 23, 2017

What are the plastic Christmas figures called?

blow molds
Before there were Christmas inflatable holiday decorations, there were wonders of plastic known as blow molds.Jul 15, 2020

How does a blow molding machine work?

With glassblowing, a glassblower blows air across heated glass, thereby creating a hollow glass object. With blow molding, a machine blows air across heated plastic that’s placed on top of a mold cavity. The air forces the heated plastic to expand across the interior walls of the mold cavity.Sep 4, 2019

What happened to General Foam Plastics?

General Foam Plastics, which makes pools, Christmas trees and water pumps, informed the N.C. Department of Commerce last week that it would close its Tarboro plant and all 215 employees would lose their jobs. General Foam, which is based in Virginia Beach, Va., gave no reason for shuttering the plant.Aug 9, 2017

Can you touch up blow molds?

Andrea says if blow molds have scratches or paint missing, don’t paint them- paint isn’t translucent and touch ups will show. She recommends leaving as is, as part of the charm, but if you must touch up, use a Sharpie.Dec 9, 2014

How do I keep my blow up blowing over?

A simple and easy way to hold down any outdoor inflatable is using bags filled with sand or gravel. It is recommended that you use two or three bags to properly secure your decorations. When you fill your bags, make sure you don’t overfill them as they need to fit in the access hole of the inflatable.Oct 19, 2020

How do you secure Christmas decorations on your lawn?

2) Pound a rebar or metal stake into the ground directly behind your lawn decoration using a rubber mallet. Attach the decoration to the stake using sturdy rope or chain, preferably through holes or openings in the back of the decoration to hide them from view.Dec 1, 2016

Did General Foam Plastics go out of business?

In January 2018, GFP sold all of its remaining merchandise, and in March, the company officially went defunct and all of its employees were laid off. The Norfolk factory was shut down after 60 plus years of work. In 2018, Cado Products revealed that they had been present at the GFP auction and purchased several molds.

Is Blow Molding cheap?

The costs in blow molding are lower as compared to injection molding. Machinery costs are typically lower as well. One-piece construction so that there’s no need to connect part halves, which can achieve shapes that injection molding cannot produce.

Is Blow Molding cheaper than injection molding?

The precision of an injection mold generally makes it more expensive than a blow mold. Blow molds have more design freedom between mold halves since each mold half forms it’s own wall shape. For example, wall thickness variation is often an important factor for product designers to consider.

Can you blow mold ABS?

Acrylonitrile Butadiene Styrene (ABS)

What is a blow mold operator?

Blow moulding machine operators operate and monitor blow moulding machine to mould plastic goods, according to requirements. They regulate temperature, air pressure and volume of plastic, according to specifications. They regrind surplus material and rejected workpieces for reuse, using a grinding machine.

Can you buy paint for plastic?

Standard exterior gloss paint is a suitable finish for plastic when used in conjunction with an appropriate primer and undercoat. Either acrylic or oil-based gloss can be used, and both are available in a wide range of colours. Typical application methods include brush, roller and spray.Jun 11, 2020

What is Krylon paint?

Kester, revolutionized the paint industry and founded Krylon, Inc., the first and still largest supplier of aerosol paints in the world. Krylon® Products were first introduced in 1947 by Foster & Kester, a manufacturer of brush-on clear protective acrylic coatings used in the commercial art business.

What is the difference between blow molding and rotational molding?

Cost: The molds used in blow molding hold up over time, whereas rotational molds require frequent replacement. Over several years, rotational molding can cost several times as much as blow molding just in terms of tooling.Dec 11, 2019

How can you tell if a product has been blow Moulded?

A clear indication as to whether an object has been injection moulded is its complexity, signs of feed points (see Fig. 1) or ejector pin marks (see Fig. 2). Nearly all, complex three-dimensional plastic components are injection moulded.

?

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general