What weight is Hy Gard oil?

What weight is Hy Gard oil?

What weight is Hy Gard oil? 32 oz.
Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines.
Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index.

What weight is John Deere high guard hydraulic oil? Low Viscosity Hy-Gard Hydraulic and Transmission Oil, 32 oz.
An exclusive formulation, specifically designed to protect John Deere transmissions, final drives and hydraulic systems.
Exceeds the minimum requirements of the JDM J20D specifications.

What grade is Hy Gard oil? Low-Viscosity Hy-Gard has an ISO 32 viscosity grade.
Hy-Gard viscosity places it between ISO 46 and 68 grades.
Both Hy-Gard fluids are multi-viscosity fluids with high-viscosity index.
Low-Viscosity Hy-Gard has an ISO 32 viscosity grade.

What weight oil is hydraulic oil? Viscosity is also most often expressed as the fluids ISO number or grade. Common ISO grades for use with hydraulic systems include 32, 46 and 68. Sometimes, 10, or 10 weight is mentioned as well.

What weight is Hy Gard oil? – Related Questions

What is the viscosity of John Deere high guard?

What viscosity is John Deere Hygard

What color is Hy Gard?

Yep never remember Hy guard or low viscosity Hy guard being reddish in color for as long as I can remember. Not sure about the earlier 303 type hydraulic oil but that would have been in steel buckets I imagine. Definitely think it could by ATF or some other low vis hydrostatic fluid.

What is John Deere Hy Gard equivalent?

According to the Official John Deere service manual for Lawn Tractors LX255,LX266,LX277,LX2 (TM1754), You Can use a SAE 5W or 10W30 Oil (Synthetic or Mineral) or John Deere HY-GARD™ J20C Oil.
Its your choice.

What is the difference between J20A and J20C hydraulic fluid?

Petro-Canada Lubricants notes that the key difference between JDM J20A (which is replaced by the current JDM J20C or JDM 20D specification) is the addition of the Alli- son C-4 seal, oxidation, wear and frictional characteristics test requirements — a fact that is not commonly known.

What is the difference between J20C and J20D?

The only rated difference between J20C and J20D that I can tell is that J20C can only be used down to 14F.
J20D can be used down to -500 or something.
The key is that I use my machine primarily in the summer, when it can exceed J20D’s maximum 86F.
I don’t use my tractor when it’s 14 degrees.

What type of fluid goes in a John Deere hydrostatic transmission?

What type of fluid goes in a John Deere hydrostatic transmission

Can I use 5w30 instead of SAE 30?

5w-30 is fine to use.
It has the same flow rate as SAE30 at normal operating temps.
The way oil works is, the first number is flow rate at ambient temp.

What is equivalent to SAE 30 oil?

Obviously, SAE and ISO use two different scales to measure viscosity. SAE 10W is equivalent to ISO 32, SAE 20 is equivalent to ISO 46 and 68, and SAE 30 is equivalent to ISO 100.

What does SAE 30 oil mean?

SAE 30 oil is a motor oil that has been given a viscosity rating of 30 by the Society of Automotive Engineers, according to AA1Car Automotive Diagnostic Help Center. Motor oils typically have ratings from 0 to 50.

Do you need John Deere hydraulic fluid?

You might think that almost any hydraulic fluid would be acceptable for use in your John Deere tractor. To avoid any negative elements of performance or wear, it’s always best to use the type of hydraulic fluid which has been designed for these specific machines.

What color is John Deere hydraulic oil?

The initial JD factory fill has red dye added to it. However, JD HyGard is clear (oil color). If you want it to be red again after a transmission fluid change you have to add some dye back in.

What is in hydraulic oil?

Today most hydraulic fluids are based on mineral oil base stocks. Some examples include: glycol ethers, organophosphate ester, polyalphaolefin, propylene glycol, and silicone oils.

?

Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines.
Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index.
Hy-Gard viscosity places it between ISO 46 and 68 grades.

?

Registered. Don, you are the first to mention Hygard fluid as being red originally. I inherited a partial can of red Hygard some years ago from a BIL.

What is the best tractor hydraulic fluid?

Mobil Delvac™ Tractor Hydraulic Fluid is an extra high performance multipurpose tractor lubricant engineered to meet or exceed transmission and hydraulic fluid requirements.

?

Hy-Gard oil can be used in most applications calling for 10W-30 or 5W-30 engine oil for transmission and hydraulic oils.
Note: Hy-Gard should be used in all applications calling for JDM J20C.
Low-Viscosity Hy-Gard should be used in all applications calling for JDM J20D.

What oil is equivalent to 424?

Some equivalent products to Mobilfluid 424 include Chevron 1000 THF, 76 Hydraulic Tractor Fluid, BlueSky Terra Multi-Trac THF and Kendall Hyken 052 Farm Tractor Lubricant.

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general