What Is The Chevy Ecotec Engine? The GM Ecotec engine, also known by its codename L850, is a family of all-aluminium inline-four engines, displacing between 1.4 and 2.5 litres. While these engines were based on the GM Family II engine, the architecture was substantially re-engineered for the new Ecotec application produced since 2000.
Is Ecotec a good engine? 2.4 Ecotec engines are found in many Chevy, Buick, Saturn, GM, and Pontiac models. The engine offers a respectable 164-182 horsepower given its small NA design. It’s also an efficient engine that offers good fuel economy. However, no engine is perfect and there aren’t any exceptions here.
How does the Ecotec engine work? The new EcoTec3 engines use direct fuel injection, which precisely meters fuel directly into the cylinders, to optimize combustion over a broad range of conditions. Also, the spark plug angle has been revised and the electrode is now closer to the center of the chamber to support optimal combustion.
What is a 2.4 L Ecotec engine? The Ecotec 2.4L engine is an all-aluminum, dual overhead cam, four-valve engine with forged steel connecting rods and oil spray cooling for reduced friction and noise. The engine is built at GM’s Spring Hill powertrain plant in Tennessee.
What Is The Chevy Ecotec Engine? – Related Questions
What cars have an Ecotec engine?
Variants of the GM Ecotec engine have been used in Pontiac, Saab, Saturn, Opel, Oldsmobile, Vauxhall, and Chevrolet, making the Ecotec a “world engine” suitable for numerous applications.
What does Ecotec stand for?
Emissions Control Optimization TEChnology
Ecotec (capitalized ECOTEC, from ‘Emissions Control Optimization TEChnology’) is a General Motors (GM) and Opel Automobile GmbH (Opel) trademark that refers to a series of emissions technologies that were implemented throughout a range of GM engines.
Where are Ecotec engines made?
The Ecotec line is manufactured in Tonawanda, New York and Kaiserslautern, Germany, and was also manufactured for Saturn in Spring Hill, Tennessee until Saturn’s discontinuation. In North America this engine replaced both the Quad-4 and the GM 122 engines and first appeared in the 2000 Saturn L-Series.
Which is better Ecotec or alloytec?
Alloytec is more responsive, more powerful (and more powerful low down) and has longer service cycles. Ecotec has more head room for mods. Alloytec is smoother and is matched to better gearboxes and better tuned 4-speeds if they have the old ones. Ecotec has proven longevity.
How much HP can a 2.4 Ecotec handle?
IIRC, the ecotec is fine to around 250 without needing the internals touched. The cobalt SS though does use forged pistons, however. The 2.4 and the 2.2 don’t have forged pistons, so those will need upgraded for any serious power.
How much power can a 2.2 Ecotec handle?
GM says the stock engine is good for about 250 HP. GM says the stock 2.2L Ecotec pistons have been tested to power levels approaching 300 HP. GM also says with forged rods/forged pistons you can go up to a 150 HP NOS setup.
Is a 2.4 engine good?
The 2.4 was generally a reliable engine, without major flaws; oil sealing was good, head gaskets were well designed, and any flaws in the basic design (including fuel and spark systems) had presumably been worked out on the earlier 2.0 Neon engines.
How many horsepower is 2.4-liter engine have?
The aluminum block direct-injected 2.4-liter inline-4 powerplant delivers 206 high-revving horsepower 81 at 6800 rpm, 182 lb. ft. of torque at 4500 rpm (both SAE net).
What vehicles have a 2.4 L engine?
EDV 2.4L DOHC Turbo engine used in a Dodge Neon SRT-4.
2.4 N/A applications: 1995–1998, 2000 Chrysler Cirrus. 1995–2006 Chrysler Sebring. 1995–2006 Dodge Stratus. 1996–2007 Dodge Caravan.
2.4 Turbo Applications: 2003–2005 Dodge Neon SRT4. 2003–2007 Chrysler PT Cruiser GT. 2004–2009 Chrysler PT Cruiser Limited.
What cars use the 2.4 Ecotec?
JASPER® Offers Remanufactured GM 2.4L Ecotec OHC Engine
(Direct Injection) (Port Injection)
2010 2006-2008.
Chevy: Equinox Chevy: Malibu, HHR.
GMC: Terrain Pontiac: G5, G6.
Buick: Lacrosse Saturn: Aura, Vue, Ion.
2011-2017 2009-2011.
Chevy: Equinox, Malibu, Impala, Chevy: Malibu, HHR.
Captiva Sport Pontiac: G6.
•
Is the GM 2.2 Ecotec a good engine?
Ecotec engines are generally sturdy and reliable.
How many miles will a 2.2 Ecotec last?
Under normal condition the ecotec should have no problem reaching 250000 miles or 400000Kms.
Where are Chevy engines made?
The same model of engine as the one made in China is produced at a G.M. engine plant in Tonawanda, N.Y., about a two-hour drive from the Canadian factory that builds the Equinox.
Are alloytec engines bad?
They are an advanced engine and fine generally if properly serviced. Some older engines can handle more abuse but are not as refined. That’s true but the Alloytec suffers from numerous serious weaknesses.
Is VY Ecotec?
The VY was the last Commodore to use the 3.8-litre Ecotec V6 engines.
Is alloytec good?
Other than reliability (and maybe torque) it’s not a better engine though. I wouldn’t buy a alloytec engined car personally. Not particularly reliable, economical, or powerfull in the real world.
How much HP can stock Ecotec handle?
The Ecotec’s outstanding feature to performance enthusiasts will undoubtedly be its impressive strength. GM Racing dyno tests confirm an otherwise bone-stock Ecotec is capable of a reliable 350 hp with forged rods and pistons (and a bunch of nitrous or boost).
