What Is A Triple Tree On A Motorcycle?

What Is A Triple Tree On A Motorcycle?

What Is A Triple Tree On A Motorcycle? . Triple Tree (“triple clamp” (US) or “yoke” (UK)) attaches the fork tubes to the frame via steering head bearings, which allow the forks to pivot from side to side, and therefore steer the motorcycle.

What is a triple tree? The Triple Tree was the name referred to the typical structure of Tyburn gallows, composed by a beam placed across the branches of two trees. The triangle shape of this structure provided it the name of the Triple Tree, used the first time in 1571, at the time of the execution of the Catholic cleric John Story.

What is a motorcycle triple? A motorcycle fork connects a motorcycle’s front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an upper yoke joined to a lower yoke via a steering stem, a shaft that runs through the steering head, creating the steering axis.

How do raked triple trees work? In most stock bikes the triple-trees hold the forks parallel to the head tube so rake is the same for the frame and the bike. Changing the rake by modifying the frame, the triple-tree or both can make dramatic changes in the trail and, therefore, in the bike’s handling.

What Is A Triple Tree On A Motorcycle? – Related Questions

What does upside down forks mean?

By design, inverted forks have shorter and thinner walled fork tubes. This results in less steering inertia and more responsive handling feel. One more benefit, inverted front ends deliver better compression and rebound dampening than conventional designs.

What is a lower triple tree?

4.8 star rating 16 Reviews. Kuryakyn’s Lower Triple Tree Wind Deflectors direct wind passing through the fork legs downward to reduce upward airflow between the tank and fairing on H-D Touring models.

Why do they call it a triple clamp?

The triple clamp provides a very rigid and strong system to hold fork legs. It can found on downhill race bikes, freeride bikes, and some “enduro” bikes (Figure 1). The “triple clamp” name refers to clamping the fork legs at three points (Figure 2).

What is a fork bridge?

Suspension forks typically have a bridge which connects the two lower legs. In the past, this also provided a hanger for the rim brakes. I always thought though that the main purpose was to ensure that the two legs remained parallel in compression, so that there was no torsion on the front axle.

Why are motorcycle forks called Forks?

The “fork” is the suspension at the front of a motorcycle.

How do you measure a motorcycle Triple Tree?

Triple trees have a dimension called off-set. It is the distance from the center of the fork tubes to the center of the neck pivot axis. It is an important factor in trail. The better manufacturers of raked triple trees reduce the off-set in order to increase trail in the final set-up.

What is the difference between rake and trail?

Rake (also called caster) is the angle of a motorcycle’s steering head of the frame (A). Trail (B) is measured in distance (inches or millimeters) between the point of the front wheel’s contact with the ground and a line drawn through the axis of the steering head.

How do you remove a triple clamp?

Loosen the bottom clamp pinch bolts on the right fork tube using a 10mm T-handle wrench. Then, loosen the upper clamp pinch bolts while holding on to the fork tube with your left hand. As the clamp loosens, the fork tube will begin to slide down.

Why are mountain bike forks upside down?

By inverting the fork so that the lighter stanchions are on the bottom, we reduce the mass of the moving part of the fork so that it will react quicker and easier to the trail. Inverting also anchors the stanchions into the stronger, larger upper tubes and crown making the overall chassis much stronger and stiffer.

Which is better USD forks or telescopic?

USD front forks are way more expensive than conventional telescopic suspension. However, these more advanced USD forks allow more bump absorption that makes the suspension more prone to damage.

Why mount shocks upside down?

Ultimately: don’t mount shocks upside down just because it looks cool. Sometimes a shock must be mounted upside down due to space limitations, or to protect the shock body, if this is the case, make sure you use a shock designed to be mounted upside down.

Who owns Tripletr nursery?

Tom van der Pauw
When Tom van der Pauw speaks, it is music to my ears. The owner of Triple Tree Nursery on Lougheed Highway in Maple Ridge, he has been involved in the garden business for years and years, ever since his parents, Beth and Martin, first opened this hugely popular garden centre on Tom’s seventh birthday back in 1962.

What is fork travel on a bike?

Fork: The thing on the front of your bike that your front wheel attaches to. Travel: The amount that a suspension fork or suspension frame can compress.

What is a double crown fork?

2) a double crown fork is mounted on the bottom of the head tube, and the top. this makes it have less flex, but it makes a fork weigh more and you can’t turn the fork as much (the stantions will hit the frame). the lowest travel you will see a double crown is about 170mm.

Are motorcycle forks universal?

Two types of motorcycle forks

How are bike forks measured?

Fork length is usually measured from the bottom of the crown to the center of the axle or where the wheel connects to the blade. This length can be anywhere from 363.5mm to 374.7 mm. A longer fork length will raise up the front end of the bike. A shorter fork length will lower it.

How does a springer fork work?

Springer forks have two springs to soften the ride, allowing the bumps of the road to be absorbed somewhat before reaching the rider’s hands. The hydraulic forks, filled with pressurized fluid, perform the same function, but with a much different feel on the road.

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general