What Is A Stopcock Valve?

What Is A Stopcock Valve?

What Is A Stopcock Valve?

How do I find the stopcock in my house? In most houses the stopcock is located under the kitchen sink. To turn off the stopcock simply turn the valve clockwise to turn off the water supply. In some houses there may also be a stopcock outside the house – look for a metal plate with the words “Water” or sometimes just a “W” on it.

Why is a stopcock called? Origin of stopcock

How does a stopcock valve work? An outside stopcock is a form of inline valve that works by rotating a stop or a plug within the chamber to stop the flow of water. When the handle or key is turned clockwise, the valve is closed and when turned anti-clockwise the valve is open.

What Is A Stopcock Valve? – Related Questions

What is the difference between a gate valve and a stopcock?

Gate valves are for low pressure systems primarily for isolation purposes for maintenance. They can also be used for flow balancing. Stop cocks are for high pressure water supply often up to 10 Bar. They can be used for emergency isolation or even used in a normally off application.

What does a stopcock valve look like?

A stopcock looks like a tap, but without an outlet spout. It will be between two lengths of pipe, acting as a connector. This allows the stopcock to block the flow of water when it’s closed off.

Who is responsible for the stopcock?

If the outside stopcock is on your property you will have to pay for a new one, if is on the road or outside your boundary the local water board will have to pay. You need to have the outside stopcock in working order incase there is a problem with the inside one.

How far should you open a stopcock?

Should Stopcock be Fully Open

Is a stopcock a legal requirement?

Is a Stopcock a Legal Requirement

What is a stopcock made of?

Stopcocks plugs are generally made out of ground glass or an inert plastic like PTFE. The ground glass stopcocks are greased to create an airtight seal and prevent the glass from fusing. The plastic stopcocks are at most lightly oiled.

Which way do I turn my isolation valve?

“To turn it off you’ll need a flat head screwdriver, the slot on the isolation valve should be following the pipe work, that’s when the water is on, if you give it a quarter of a turn in either direction the slot should be going across the pipe work, that’s how you know the isolation valve is in the off position.”

How do you free up a seized stopcock?

Try turning the handle in both directions as this can often loosen the seized part. Spray the penetrating oil down the shaft and where the gland nut is. If the stop tap handle will still not move then remove the gland nut using a suitable spanner, this will turn anti-clockwise.

Can I use a ball valve as a stopcock?

A spherical valve is not a plugcock. For the application for which you intend (control of whole supply to your premises) the valve would be classed as a stopvalve and would need to be a screwdown type.

Is a tap a gate valve?

Gate valves are tap like fittings that release or shut off the flow of fluid in pipework.

How can you tell if a gate valve is open or closed?

As the operator rotates the handle counterclockwise, the stem lifts out of the handle, opening the gate. A clockwise rotation of the gate moves the stem back into the gate and closes the valve. When the stem is no longer protruding beyond the handle, the gate valve is closed.

Should main water valve be open all the way?

Ball valves may be the most reliable valve and are commonly used for main water shut offs. Similar to gate valves, ball valves should be all the way open to allow the full flow of water or all the way closed to restrict all water from flowing.

What are the different types of shut off valves?

Shut off / Stop Valve – Types Explained
Ball Valves. A ball valve is designed with lever handles and works with a short 1/4 turn of the lever handle.
Gate Valve. A gate valve features a metallic gate inside the valve body which is used to turn it on an off.
Globe Valve.
Angled/Straight Valve.

Do all sinks have shut off valves?

Why

Do all houses have an external stopcock?

Not all properties will have an outside stop valve fitted and this is quite common in older homes, or if the incoming water supply serves both your home and one or more of your neighbours. If you’re unable to find your external stop tap you should contact your local water supplier.

How do you replace a stopcock?

Grip the body of the tap with water pump pliers. Use a spanner to turn the large nut in the centre of the stopcock anticlockwise to loosen it. Unscrew the tap handle and pull the whole handle and spindle out from the body of the tap. Pull off the old washer from the end of the spindle and replace it with a new one.

Which way do you turn a water stop tap?

turn the stop tap in a clockwise direction. check that the cold water stops flowing into the kitchen sink – this is what’s supposed to happen. turn the stop tap anti-clockwise.

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general