What is a 14mm socket equivalent to?

What is a 14mm socket equivalent to?

What is a 14mm socket equivalent to?

What is a 14mm socket in standard? 14mm. 9/16 Inch. 0.55118 Inches. 15mm. Just short of 5/8 Inch.

Is 14mm the same as 3 8? 10mm = just over 3/8 inch. 14mm = almost 9/16 inch. 15mm = almost 19/32 inch. 16mm = 5/8 inch.

What standard socket is between 14mm and 15mm? Metric Socket Sizes Chart
1/4” Drive 3/8” Drive 1/2” Drive
9mm 12mm 15mm
10mm 13mm 16mm
11mm 14mm 17mm
12mm 15mm 18mm
18 more rows•

What is a 14mm socket equivalent to? – Related Questions

What socket is equivalent to 15mm?

SAE to Metric Conversion Chart
SAE Metric Inch
9/16″ 0.563
15mm 0.591
19/32″ 0.594
5/8″ 0.625
47 more rows

What’s equivalent to a 30 mm socket?

Wrench Size And Conversion Table
Inches Millimeters Spanner
1.063 27mm 1 1/16 AF; 27mm
1.100 5/16 Wworth; 11/16 BSF
1.125 1 1/8 AF
1.181 30mm 30mm
65 more rows

Is a 3/8 socket the same as a 10mm?

The equivalent imperial size of a 10mm socket is a 3/8 socket.

What is bigger 3/8ths or 1 2?

Therefore, 3/8 is not greater than 1/2 and the answer to the question “Is 3/8 greater than 1/2

What size is bigger than 3 8?

Fraction Conversion Table
Fraction Decimal Millimeters
23/64 0.359375 9.128
3/8 0.375 9.525
25/64 0.390625 9.921
61 more rows

What is 3/8ths of an inch in MM?

9.53 mm
Conversion table Inches to mm
Dimensions — Inches to Metric
Decimal Inches Fractional Inches Metric
0.375” 3/8” 9.53 mm
0.438” 7/16” 11.13 mm
0.500” 1/2” 12.70 mm
21 more rows

What is the order of socket sizes?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Standard Deep Sockets (1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What are the 4 socket drive sizes?

These drive fittings come in four common sizes: 1⁄4 inch, 3⁄8 inch, 1⁄2 inch, and 3⁄4 inch (referred to as “drives”, as in ” 3⁄8 drive”).

What is the most common socket drive size?

Drive Size
½-inch drive size sockets are for high-torque applications like automotive wheel replacement and when you are using a breaker bar.

⅜-inch drive size sockets are the most common and most available.

¼-inch drive size sockets are ideal when you are in tight spaces or when you are working with recessed nuts.

What is equivalent to 16mm socket?

STANDARD / METRIC WRENCH CONVERSION CHART
BOLT DIAMETER STANDARD METRIC
1/4″ 7/16″ 11mm
5/16″ 1/2″ 13mm
3/8″ 9/16″ 14mm
7/16″ 5/8″ 16mm
39 more rows•

What is equivalent to a 33mm socket?

What is a 33mm socket in standard size

What socket is equivalent to 28mm?

SAE to metric wrench and spanner converter chart
Standard SAE US Wrench/Spanner Size (inches) Metric Wrench/Spanner Size (mm)
1 1/16 26.99
27
28
1 1/8 28.58
86 more rows

What is a 30 mm in a standard size?

30mm is 1.18″. That would be about a 1 3/16″ SAE size.

What is the standard size for 30mm

Is there an 18 mm socket?

TEKTON3/8 in.
Drive 18 mm 12-Point Shallow Socket.

What does AF mean in tools?

Across Flats
AF means ‘Across Flats’ and means that the spanner fits nuts and bolts with hex heads of this size, some imperial standards were produced with the spanners marked with the thread size.

What can I use if I don’t have a 10mm socket?

3/8th of an inch is the closest SAE wrench size to 10mm. Notice that the SAE (fractional inch) wrench sizes are not exactly equivalent to metric sizes. In some cases the “equivalents” are close enough to be interchangable usually. The problem will come when you have a stuck nut or bolt.

What is 10mm socket used for?

In fact, the 10mm socket is one of the most commonly used metric size sockets of all. It’s no secret that the majority of parts under the hood and in the car require a 10mm. The applications may vary from car to car, but the 10mm is absolutely vital to complete a project.

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general