What does 28 gallons of fertilizer weigh? UAN28 weighs 10.6 pounds per gallon, so 10.6 pounds X 0.28 = 2.9 pounds. UAN32 weighs 11.06 pounds per gallon, for a calculation of 11.06 pounds x 0.32 = 3.5 pounds.
How much does a gallon of 28 nitrogen fertilizer weight? 10.
66 lbs
Liquid:
Liquid:
1 gallon 28% (28-0-0) = 10.
66 lbs.
1 gallon 10-34-0 = 11.
65 lbs.
1 gallon 7-21-7 = 11.
00 lbs.
1 gallon 9-18-9) = 11.
11 lbs.
How many pounds is 28% of a gallon? 11 lbs per gallon.
What does 32 liquid fertilizer weigh? Thirty-two percent UAN (32-0-0) weighs 11.
06 pounds per gallon and salts out (solids separate from the liquid) at 32°F.
What does 28 gallons of fertilizer weigh? – Related Questions
How much does 5 gallons of fertilizer weigh?
UAN32 weighs 11.06 pounds per gallon, for a calculation of 11.06 pounds x 0.32 = 3.5 pounds. How much does a 5 gallon bucket of fertilizer weight
How many gallons of nitrogen are in a ton of 28?
UAN weighs roughly ten pounds per gallon, so (if my math is right) 21.4 gallons (or 214lbs) of 28% equals 60lbs of N. If you used 32% UAN that would be cut down to 18.7 gallons.
How many gallons is a ton of 32 nitrogen?
Solution 32 has 3.54 lb of N per gallon. A gallon weighs 11.06 pounds and that comes out to 180 gallons per US ton (2000 lb.)
How much does 1 gallon water weigh?
8.34 pounds
One US liquid gallon of fresh water weighs roughly 8.34 pounds (lb) or 3.785 kilograms (kg) at room temperature.
How much does a gallon of 32 nitrogen weight?
11.1 lbs/gallon
32% N weighs 11.1 lbs/gallon and contains 3.6 lbs of nitrogen per gallon.
How much water do you add to 32 UAN to make 28?
Every ton of 32% is about 180 gallons. You would add about 39.5 gallons of water to that to make 28%.
How much does 32 Nitrogen cost?
Urea ammonium nitrate (UAN) solution (32-0-0) has cost an average $497 per ton in the Southwestern states (Table 3).
How many gallons of fertilizer do you need per acre?
* 300 gallons of fertilizer applied to 20 acres = 15 gallons of fertilizer applied per acre * 1.069 lbs.
What does 32% weigh?
It weighs 11.08 lbs. per gallon, has a pH of approximately 7 and has a negligible vapor pressure.
How much fertilizer do I apply?
You should apply 10 pounds of the fertilizer per 1,000 square feet (five pounds from the table multiplied by the two pound recommendation). * When using a soluble inorganic nitrogen fertilizer a typical recommendation is to use only one pound of nitrogen per 1,000 square feet for a single application.
How much does urea fertilizer weigh?
Urea (46-0-0) 48-52 lbs.
/cu.
ft.
Diammonium Phosphate (18-14-0) 56-60 lbs.
Can 17 lbs per gallon?
Derived from Ammonium Calcium Nitrate Double Salt and Ammonium Nitrate. Density: 12.6 pounds per gallon at 68° F.
How many gallons are in a ton of nitrogen?
Weight Liquid
1 Nm3 gas 2.757 1.5443
1 gallon liquid 6.745 3.785
1 liter liquid 1.782 1.0
1 short ton 2000 1121
4 more rows
How do you calculate nitrogen?
To find the amount of nitrogen in a bag of fertilizer, you must calculate the pounds of nitrogen per 1,000 sq.
ft.
To calculate the pounds of nitrogen in a bag of fertilizer, multiply the weight of the bag by the percent nitrogen (this is the first number in the N-P-K designation on the front of the bag).
How many pounds of nitrogen per acre are needed for corn?
Corn plants use large quantities of nitrogen to grow and yield. Corn removes 1 pound of nitrogen for every bushel of grain produced, so a 250 bushel per acre yield goal requires 250 pounds of nitrogen available to be used by your growing corn plants.
How do you calculate 28 Nitrogen?
The calculation can be relatively easy if you remember that 28% UAN has 2.9 pounds N per gallon and 32% has 3.5 pounds N per gallon. How did we come up with these amounts
How many gallons are in a ton?
More information from the unit converter
