How many CFS are in a GPM?

How many CFS are in a GPM?

How many CFS are in a GPM? A flow of one cfs is approximately equal to either 450 gpm, one acre-inch per hour, or two acre-feet per day (24 hours).

How do you convert GPM to CFS? Conversion formulas Cubic feet per second , US gallon per minute (cfs, ft3/s, gpm): cfs= 448.8325660485*gpm. gpm= cfs/448.8325660485.

How many gallons per minute is CFS? 1 Cubic foot per minute (cfm) is equal to 7.4805195883 US gallons per minute (gpm).

How many gallons are in CFS? Cubic feet per second (cfs):

How many CFS are in a GPM? – Related Questions

How do you calculate CFS?

Calculate the discharge in cubic feet per second (cfs) by multiplying velocity (ft/sec) by the cross-sectional area (ft2) of the stream.

How many ft lbs is 1 HP?

1 horsepower (hp) = 550.

What is gpm to Ft S?

Multiply the number of gallons per second by 60 to convert to gallons per minute.

How do you convert GPM to Ft SEC

How do I calculate GPM?

The formula to find GPM is 60 divided by the seconds it takes to fill a one-gallon container (60 / seconds = GPM).
Example: The one-gallon container fills in 5 seconds, breakdown: 60 divided by 5 equals 12 gallons per minute.

How do you convert GPM to FPS?

To link to this flow – gallon US per minute to cubic feet per second units converter, only cut and paste the following code into your html.
conversion result for two flow units:
From unit Symbol Equals Result To unit Symbol
1 gallon US per minute gal/min = 0.

How do you convert GPM to gallons?

The formula to find GPM is 60 divided by the seconds it takes to fill a one gallon container (60 / seconds = GPM). Example: The one gallon container fills in 5 seconds. 60 / 5 = 12 GPM. (60 divided by 5 equals 12 gallons per minute.)

How many gallons is an acre foot of water?

325,851 gallons
One acre-foot of water equals 325,851 gallons.

How do you convert CFS to gallons?

Multiply the number of cubic feet per second by 7.4805 to convert to gallons per second. For example, if you start with 42 cubic feet per second, multiply 42 by 7.4805 to get 314.181 gallons per second. Multiply the number of gallons per second by 60 to convert to gallons per minute.

What is a good CFS for kayaking?

If the flow indicated is above 6,000 cubic feet per second (cfs), only very experienced paddlers should enter the water. From 3,000 to 6,000 cfs you should have very strong paddling skills. Below3,000 cfs is generally calm, and anything below 300 to 500 cfs will be too low for paddling.

How much water is a unit?

The billing units are equal to 748 gallons of water.

What is the unit of flow rate?

In S.I. units (International System of Units), volume flow rate has units of meters cubed per second, m 3 s dfrac{text m^3}{text s} sm3​start fraction, start text, m, end text, cubed, divided by, start text, s, end text, end fraction, since it tells you the number of cubic meters of fluid that flow per second.

How many HP is 40 lbs of thrust?

Pounds of Thrust to Horsepower Chart
Pounds of Thrust (lbs) Amps Horsepower
40/45 42 0.5
50/55 50 0.6
70 42 1.01
80 56 1.35
3 more rows•

How many kgs is 150?

Convert 150 Pounds to Kilograms
150 Pounds (lbs) 68.039 Kilograms (kg)
1 lbs = 0.453592 kg 1 kg = 2.204623 lbs

Is 400 ft lbs of torque a lot?

Having 400 pounds of torque down low means you have more horsepower down low. Having 400 pounds of torque up high means you have even more horsepower then you had down low.

How do you calculate GPM ft2?

a. Filtration Rate (gpm/ft2) = Flow (gal/min) Surface Area (ft2)
b. Percent Strength by Weight = Weight of Solute x 100. Weight of Solution.
c. Specific Capacity = Flow (gallons per minute) Well Drawdown (feet)

Is gpm a velocity?

Alternatively, if the flow rate is measured in gallons per minute, the following formula can be used to calculate water velocity. Thus, the velocity v in feet per second is equal to 0.408 times the flow rate Q in gallons per minute divided by the pipe diameter D in inches squared.

How do you convert GPM to PSI?

Can you convert GPM to PSI

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general