How Do You Get The Spare Tire Off A 2013 Chevy Silverado?

How Do You Get The Spare Tire Off A 2013 Chevy Silverado?

How Do You Get The Spare Tire Off A 2013 Chevy Silverado? Often, the spare tire is sometimes mounted under the rear of the truck bed on most trucks.

Step 2 – Release spare tire
Insert jack handle into hole.
Turn the handle repeatedly until the spare tire has come down and the cable is fully slacked.
Remove retaining clip from cable to free spare tire.

How do you get the spare tire off a Chevy Silverado 1500? Locate the spare tire access hole on the right side of the rear license plate. In some newer model Chevy trucks, you might need to use the ignition key to remove a locking device designed as a spare tire theft deterrent. If so, insert the key into the lock and turn the key to remove the lock.

How do you get the spare tire off a Chevy Silverado without a tool? Removing a spare tire without the factory tool is easy when you follow these steps:
Get under the truck.
Pull off the guide tube.
Pull out the key with pliers.
Insert crank into the new hole.
Turn the crank counterclockwise to lower the tire.

How do you get a spare tire off a truck without a tool? You can do so by having a few blocks behind the front wheel tires. Then crawl under the back of the truck. Here, you can slip the spare carrier cable end from the center hole of the rim. You can do this by hand, and you can then pull the tire from under the car.

How Do You Get The Spare Tire Off A 2013 Chevy Silverado? – Related Questions

What is the tool called that lowers the spare tire?

The Steelman 7-Piece Spare Tire Retrieval Tool Kit allows you to remove cradle-suspended spare tires from a variety of vehicles quickly.

Where is the jack located on a 2014 Chevy Silverado?

He location of the jack in the 2014 Chevy Silverado depends on the cab size. In the regular cab models, the jack is located behind the passenger seat. In the Double or Crew cabs, the jack is behind the passenger side of the rear seat on the shelf.

How do you loosen a spare tire?

Locate your spare tire and jack in the trunk of your vehicle. Use the lug wrench to loosen the lug nuts on the wheel with the flat tire. Use the jack to lift the wheel off of the ground. Remove the lug nuts that you loosened prior to using the jack by using the lug wrench.

How do you put the back seat down in a 2007 Chevy Silverado?

Pull the cushion to make sure it’s locked.
If not, push it toward the seat-back until you hear it latch.
Pull the strap behind the rear seat headrests.
Push the seat-back down to fold the seat (2007 and newer models).

Where is the jack located on a 2013 Ford f150?

rear passenger area
The jack for a 2013 Ford F-150 truck is going to be located in the rear passenger area.
You’re going to need to fold the seat down and then lift upward by pressing down on another switch.
Once You have the seat up You’re going to see the jack on the driver’s side of the rear seat.

What is in a spare tire kit?

A tire repair kit, also called an inflator or mobility kit, takes up the least amount of space in a trunk because no spare is involved. Instead, you get a kit consisting of an air compressor with an attached hose and an integrated bottle of a thick, sticky sealant. Then you use the compressor to inflate the tire.

How do you get the spare tire off a Chevy Uplander?

Examine the rear bumper area; you will notice a hole leading to the spare tire winch. Insert the flat end of the extension tool into the hole and into the winch. Turn the tool to the left to lower the spare tire. Once the spare tire is lowered, you can remove the tire from the cable plate by positioning it at an angle.

Does Walmart Automotive do tire alignments?

Walmart Auto Care Centers do not offer wheel alignment services, Walmart corporate customer service representatives said. However, representatives told us that Walmart Auto Care Centers do offer other tire services, including tire repair, mounting, rotation, and balancing.

Can you jack up a truck by the axle?

Yes, you can jack up the truck anywhere on the axle. If you’re using jack stands, place them near the jack. If you place your jack incorrectly, you can injure your car. To find the proper place to position the jack for your particular vehicle, check your owner’s manual.

Where do you put a jack on front of a truck?

Always place the front jack stands directly under the frame on any type of truck. Support the rear of the truck with jack stands under each axle.

Is it OK to jack up a truck by the differential?

When the tire shop guys lift a car by the differential, they’re probably being safe. Likewise, if you do the same thing from home with a good hydraulic jack, you’re probably being safe. If your vehicle manufacturer says that the differential is a recommended lifting point, then you’re definitely being safe.

How do you unlock a lock on a tire?

Method 1 of 2: Remove your wheel locks with a wheel lock key
Materials Needed.
Step 1: Make sure your vehicle is in park.
Step 2: Align the key with the nut.
Step 3: Place your lug nut wrench on the wheel lock key.
Step 4: Turn the lug nut wrench counterclockwise.
Step 5: Turn the wheel lock off by hand.
Materials Needed.

What size Jack do I need for a Chevy Silverado?

A 2-ton floor jack is recommended for the Chevy Silverado 1500.

Will a 2 ton floor jack lift a truck?

For most sedans and small cars, a two-ton jack will be sufficient for raising a corner.
A pickup truck or SUV could require twice that rating (four tons) to give you the margin of safety that you need.
2 ton is the safe working load limit the jack is rated for.

Are 3 ton jack stands enough for truck?

3-ton jack stands are rated to hold a maximum weight of 6,000lbs.
Leaving you 2,000 lbs of extra carrying capacity for the jack stand pair.
Therefore, for basically any car a 3-ton jack stand pair will be enough to raise and support it.

?

?

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general