How do you calculate built up area from floor plan?

How do you calculate built up area from floor plan?

How do you calculate built up area from floor plan? Built-up area = carpet area + wall area.
Super Built-up area = Built-up area + Common Areas(common area that includes the corridor, lift lobby, lift, etc.
) Floor area ratio (FAR) is the ratio of a building’s total floor area (gross floor area) to the size of the piece of land upon which it is built.

How is built up area calculated?

How do you calculate built up area from floor area ratio? If the size of the plot or land being used for a project is 500 sq ft and the FAR determined for that particular city/locality is 1.5, then, the total floor area that can be constructed will be 750 sq ft (500×1.5).

What is total built up area of a building? Built-up area or the plinth area is the gross area of the property.
It is the total size of the house, including the carpet area, the thickness of the walls, balcony, terrace, ducts and utility area.
Fundamentally, the built-up area is 10-15 percent more than the carpet area of the house.

How do you calculate built up area from floor plan? – Related Questions

What is the built up area of a building at any floor level?

Plinth area is the covered built-up area measured at the floor level of any storey or at the floor level of the basement.
Plinth area is also called as built-up area and is the entire area occupied by the building including internal and external walls.
Plinth area is generally 10-20% more than carpet area.

What is included in built up area?

Built-up area is the total area measured on the outer line of your flat, including balcony, terrace, etc.
It refers to the usable (or carpet area as described below) of your flat plus the area occupied by the walls and columns of your flat plus a little more.

Does built up area include balcony?

‘Built-up Area’ is the carpet area plus the areas covered by inside and outside walls, balconies and verandahs attached to the unit for exclusive use.
‘Super Built-up Area’ is the built-up area as above plus proportionate share of common areas such as reception, lobbies, staircases, lift shafts etc.

Does sq ft include 2nd floor?

If the second floor is the same size as the first floor, then just double the square footage to find the square footage of the entire home. Stairways and closet areas are included in the square footage length. Finished attic square footage is included if an area has at least seven minimum feet of clearance.

What is a good floor area ratio?

It implies that the total floor areas of all the buildings’ floors on the said plot of land should not exceed one-fifth of the plot area.
Hence, if the plot is 15,000 square feet, the aggregate floor areas of the floors in all the buildings on the plot should not be more than 3,000 square feet.

Why is floor area bigger than Lot area?

Floor area is the useable space in a building after construction or the square footage. Lot area refers to the entire property or parcel of land. The only way this is possible is if the building has so many floors that the useable floor space is greater than the parcel size.

What is the height of a building?

Building height is measured from finished grade located within 2 feet of the foundation wall to the highest point on the building or structure.


Floor space index, also known as floor area ratio (FAR), is the maximum area that can be constructed on a plot of land. It is regulated by the municipal or local authorities of the respective State government.


FAR is calculated by a simple formula – total covered area of all floors divided by the plot area.
Suppose the builder has got a plot of 1,000 sq m and the permissible FAR, according to development plans, is 1.
He is allowed to construct a building on 1,500 sq mt of this plot.

Is built up area and plot area same?

The total area of the building in the area of the plot (plot area) is called the built-up area.
In simple terms, the area excluding the empty space around the building is called the plinth area or built-up area.

Is built up area is greater than plot area?

Built up area is the total area of your flat or bungalow that includes the carpet area and the wall thickness.
This will include all the space you can move on, the area of walls and utility area.
Normally, built up area is 10-15% more than the carpet area.

Is covered area and built up area same?

Carpet area is approximately 75% of the super-built-up area.
Covered area: It is the actual area under the roof +walls, pillars & balconies.
It is approximately 8 – 10% more than the carpet area.

Should I pay for built up area?

Pay only for built up area, not super built up. Pay Stamp Duty Charges On Built up Area. The RERA act has a provision ensuring that homebuy pay only for the carpet area, that is the area within the wall. The term “carpet area” has also been described under the act.

Can builder charge for super built up area?

The builder can’t charge for the super built-up area, as is the practice at present, where you get 900-1,000 sq.
carpet area if you book a 1,300 sq.
The builder will also have to disclose every detail about the project – number of apartments, carpet area, etc.

Is bathroom included in carpet area?

Carpet area is the actual usable size of the flat/villa minus the thickness of the wall. This also includes the bathroom and kitchen. Any common areas outside the apartment like staircase, lift, security room, etc., are excluded from this calculation.

Is it legal to cover balcony?

You are legally obliged to take revised permission from local authority for covering balcony, as it is a deviation from approved plan, though most of the people don’t do it and perhaps most of the local authority also ignore illegal construction.

What is difference between built up and super built up area?

The super built-up area is the total sum of the built-up area and the space occupied by common areas like lobby, staircase, elevator, shafts, clubhouse, etc.
Its value is obtained as the difference between the super built-up area and the carpet area.
Many developers price the apartment based on the loading factor.

Frank Slide - Outdoor Blog
Enable registration in settings - general