How Do I Report An At&T Line Down?
How do I report a downed ATT line? Downed or obstructed lines
How do I report a landline not working? Opt to call the customer service line on your phone bill using an online calling service or another person’s phone in order to report directly that your phone line is fault. Request a service order so that they will be sure to respond to your service call promptly. Check your phone after the service call.
Who do you call for low hanging wires? utility company
Any time you have a safety concern about sagging or downed lines, it is best to contact the utility company or call 9-1-1. When calling or writing the utility company who is responsible for the low hanging power lines, make notes of every phone contact, and keep copies of all written communications.
How Do I Report An At&T Line Down? – Related Questions
Why is my AT&T landline not working?
Unplug the short telephone cord and plug in your corded phone and determine if the problem still exists. If you do not have a clear dial tone, the problem is with the AT&T network. Unplug the corded phone and replace the short telephone cord. Make sure you close and tighten the Telephone Network Interface cover.
How do I get a live person at AT&T?
Talk to a real person at AT&T
Call AT&T’s service number at 1-800-331-0500.
When the automated system alerts you that your call may be recorded, press zero.
You’ll be asked if you’re calling from the phone number associated with your account.
The automated system will ask what service you’re calling about.
•
Who is responsible for cable line from pole to house?
The customer/owner is responsible for installing, maintaining and repairing all equipment beyond theservice connection point except for the electric meter. If you receive overhead electric service, your electric system con- sists of the following: 1. Electric Lines that run from the utility pole to your residence.
What would cause phone not to have dial tone?
Make sure the phone cord is plugged into the correct port on your phone or device. Unplug the phone or device from the wall jack. Plug your phone or device into another wall jack that you know is working. If the dial tone returns it means your phone or device is damaged or defective.
Why is my phone line not working?
If the phone still doesn’t have a dial tone, then the phone itself is likely broken, or the cord isn’t working. Try a different phone cord. If this gets your original phone working, then the problem was a faulty cord, which can easily be replaced. If this doesn’t work, then you’ll need a new phone.
How do I fix my AT&T service?
Visit the Troubleshoot & Resolve Tool
How low is too low for power lines?
Power Lines Over Streets and Roadways With Commercial Traffic. For any driveways, alleys, roads, or streets likely to carry vehicles more than 8 feet in height, the guideline is for all power lines to be at least 18 feet above the ground measured at their lowest point.
Can I touch the power line going to my house?
Power lines are not insulated and you should always avoid contact with them. It is quite possible for people to get electrocuted if you touch power lines.
How low can telephone wires be?
According to the National Electrical Safety Code, telephone lines must be at least 14 feet above the ground and electrical lines must be at least 15-½ feet above the ground. Sometimes, though, the lines will hang lower than the allowable minimum heights.
Is AT&T getting rid of landlines?
AT&T is more direct: It wants to switch off all of its landline service, everywhere, by 2020. Customers will be given a choice of wireless or U-verse in urban areas and only wireless in rural ones.
How do I reset my AT&T cordless phone?
Complete the following steps to reset the telephone system:
Step 1: Disconnect the power to the telephone base.
Step 2: Disconnect the handset battery.
Step 3: Wait a few minutes and then reconnect the power to the telephone base.
Step 4: Reconnect the handset battery.
How do you get straight to a representative?
how-to 4 Tips For Getting A Human Customer Service Rep On The Phone
By Voice: Say “Agent” sternly into the phone.
By Keypad: Press “O” in a menu.
By Placing an Order: You do not actually need to place an order, but most systems will punch you through to a live rep if they know you are going to buy something from them.
•
How do I talk to an AT&T representative?
Dial 1-800-331-0500. Say “speak with a customer service representative” Stay on the line. After that, the automated phone system will connect you to a live customer service agent from AT&T.
How do I call AT&T customer service from my phone?
New service
New service. 888.333.6651. Monday – Friday, 7am – 9pm CT Saturday – Sunday, 8am – 9pm CT.
Order status. 877.782.8870. Available 24/7.
Support for travel abroad. +1.314.925.6925. Available 24/7. FREE from mobile phone.
Disability resources. TTY: 866.241.6567. Voice: 866.241.6568.
Can I remove the phone line from my house?
A: Cable and phone wires don’t carry current, so it’s safe to remove them. However, it’s critical not to cut into a power line, as you know. Find it by doing a Web search for the words “Pepco equipment responsibility.” The wire to your house is Pepco’s responsibility; past the weather head, it’s yours.
Who is responsible for the service drop?
A standard service drop includes three cables, or conductors.
Service Drops Provide All Power.
How Is Responsible For Fixing the Service Drop
Who owns the utility pole?
One utility owns the pole, but multiple utilities use it — and each has its own way of numbering it.
