Do Torque Sticks Really Work?

Do Torque Sticks Really Work?

Do Torque Sticks Really Work? Torque sticks are useful, but they are no substitute for final torquing using a calibrated torque wrench.
The proper procedure for using a torque stick begins with hand-tightening the fasteners.
Then drop the vehicle to prevent the wheel from turning and use a torque wrench to do the final torquing.

Do torque sticks work with electric impacts? As a general rule of thumb, you can use a torque stick that gives you a torque lower than your intended value and then torque up with a torque wrench. They should never be used with cordless impact wrenches if you expect accurate torque values.

Do torque bars work? If you do a lot of wheel work on a regular basis, investing in a good quality set of torque sticks will have a huge pay off for you. You’ll be able to finish tightening your lug nuts much faster, without sacrificing quality or safety. Torque sticks are very simple to use, but keep in mind that they are not foolproof.

Do torque sticks wear out? They do wear out. If someone used it backwards it’s garbage. Excessive droppage can hurt them too. Not accurate enough to check a torque wrench against.

Do Torque Sticks Really Work? – Related Questions

How accurate are torque extensions?

The torque sticks are accurate enough when used on stock vehicles. It is more important that the studs and nuts are in good condition and properly lubricated. If the nuts are even the slightest bit tight on the threads, torque is a useless indicator of whether they are ‘properly tightened’ anyway.

How many foot pounds do you tighten lug nuts?

Most automotive lug nuts are tightened to 90 – 120 ft.
lbs.
, trucks will be more, about 120-150 ft.

What is the proper lug nut torque?

80 to 90 ft-lbs
And when you look at that, and realize that the average torque required on a lug nut, to hold the wheel on, is 80 to 90 ft-lbs, well you can imagine how over-tightened some of these lug nuts are.
Now that’s a problem because it almost guarantees warped brake rotors.

Can you use torque sticks with a breaker bar?

Step 1: Select A Torque Stick With 20% Lower Torque Than Your Final Wheel Torque. Start by using a breaker bar (not a torque wrench) to break loose the wheel nuts. Torque sticks are used as extensions on air impact wrenches to stop applying torque when they reach a specified flex point.

What is a torque adapter?

Posted by Pia Limpiyasrisakul on .
Torque wrenches are used to apply a correct torque (force) to a ‘critical part’.
Often we’d like to apply the correct torque in order to: Avoiding over-tightening the parts(s).

Do torque sticks need to be calibrated?

While all torque wrenches will need to be calibrated regularly, you can prolong the life of each calibration by returning the setting of the torque wrench to zero after each time you use it.

Why should you never use a torque stick to remove a lug nut?

You are applying shock and inertia to the lug to get it to come off. Do not use the impact to tighten the lug nuts, though. It is very easy to over torque them. Use a ratchet and finish up with a torque wrench for accuracy.

How often should you replace torque sticks?

Especially when installing new wheels, the wheel fasteners should be re-torqued after 25 to 100 miles.

Can you set torque on impact wrench?

Currently, none of the cordless impact wrenches will allow you to adjust the torque to those exact settings. (An air impact wrench won’t either for that matter.) The only solution is an attachment that fits onto to the end of the impact and then the socket fits onto it.

How does torque extensions work?

Torque sticks work by flexing (like a torsion bar) when a torque limit is reached. When the stick flexes or turgid, it resists further tightening of the fastener thereby helping to regulate further application of torque thus preventing eventual damage that might occur.

What is a torque extension bar?

Use these torque extension bars to prevent over-tightening of lug nuts.
Designed for use with standard or thin-wall sockets, each torque extension bar is color-coded and engraved with torque range for quick reference.
The extension bars work with any impact wrench, even those with an extended anvil.

What is a good torque wrench?

Best Torque Wrenches
Neiko Pro 03709B Torque Wrench.

Industrial Brand CDI 2503MFRPH Snap-On Torque Wrench.

Capri Tools 31000 Torque Wrench.

Tekton 24335 Torque Wrench.

ACDelco ARM601-4 Torque Wrench.

Precision Instruments PREC3FR250F ½ Inch Torque Wrench.

Park Tool TW 5.
2 Ratcheting Click Type Torque Wrench.

How tight should lug nuts be without torque wrench?

You should always check your lug nuts 20 miles down the road after changing a tire. Sometimes, one will loosen up. No car have a torque wrench in their tools set for tire change. That means that isn’t necessary, just tight them until stop moving and that’s all.

How tight should lug nuts be by hand?

Snug them down and tighten pretty much as tight as you can without blowing something out, but not so tight you can loosen it with the samw equipment. Then drive, carefully, check for loose nuts every 25 miles or so, and dont drive fast. until they break off, then back off 1/4 turn.

Does oil drain plug need torque?

Torque Wrenches aren’t necessary for changing the oil in your car. In fact, other tools perform even better than it. If you haven’t used a torque wrench on your drain plug, it’s not advisable to use it until you gain experience.

Is it bad to over torque lug nuts?

Excessively tightened lug nuts can strip the threads, distort brake rotors, damage the wheel, and possibly shear off the lug stud. Insufficiently tightened lug nuts can come loose, with catastrophic consequences.

What is the torque spec for aluminum wheels?

70 ft.
lbs
Aluminum wheels should have the lug nuts torqued to 70 ft.
lbs.
The beadlocks should be 20-22 ft.

Frank Slide - Outdoor Blog
Logo
Enable registration in settings - general