Are All Ford Aod Transmissions The Same? All our AOD transmissions share the same gear ratios: 2.40:1 on the first gear, 1.47:1 on the second, 1:1 on third and 0.67:1 on fourth.
How can you tell if a transmission is AOD? The AOD transmission can be identified in several ways. Its prominent 14-bolt pan is probably the easiest way. The pan is basically square but the back two corners are tucked in a little tighter than the front corners making the pan look like home plate with the front point cut off.
Are Ford AOD transmission any good? The Ford AOD transmission was evident in cars like the Mustangs, Fairmont, and LTDs around 1980 and 1993, and it was quite unique even though not in a really good way. The Ford AOD transmission shifting problem, therefore, gave it its unreliable performance reputation.
What year did Ford use the AOD? The AOD was introduced for the 1980 model year and used in the 1980 to 1986 F-150, 1982 to 1993 Ford Bronco, and many Ford passenger cars. It was Ford’s first 4 speed overdrive transmission and was used to replace many of their 3 speed transmissions (C4, C5, etc).
Are All Ford Aod Transmissions The Same? – Related Questions
What vehicles use the AOD transmission?
Unsourced material may be challenged and removed. The AOD (automatic overdrive) is a four-speed automatic transmission, with the 4th gear as overdrive.
4R70W used in all applications:
Ford F-Series.
Ford Crown Victoria.
Mercury Grand Marquis.
Lincoln Town Car.
Ford Mustang.
Ford Expedition.
Ford E-Series.
What is the difference between AOD and AODE transmission?
The “AOD” uses a cable (TV = throttle valve) attached to the throttle linkage to “control” transmission shifting. The AODE uses inputs from the computer to send signals to solonoids in the transmission.
How much horsepower can a AOD transmission handle?
450 hp
Because of this odd power flow, Lentech’s Len Bertrand tells us a stock AOD can handle 450 hp, at best, and will always be hard on 3/OD clutch packs.
What year AOD is best?
’89-’93 are the best years for the AOD, they already have the better internals for anything with horsepower.
How do you drive a Ford AOD transmission?
Hold 3rd gear by keeping it in D. Hold 2nd gear by keeping it in 1. Just remember if you’re slowing down to a stop and you’re holding 2nd gear in 1, once you get down to 5 mph or so it shifts into first and your car will jerk. So when you slow down @ about 10mph shift back into D or OD.
How long is a Ford AOD transmission?
AOD
Style A D
Small Block 30 3/8 in. 5 5/16 in.
What is AOD stand for?
AOD
Acronym Definition
AOD Advanced Optical Disc (blue laser based storage technology)
AOD AMD (Advanced Micro Devices, Inc.) OverDrive
AOD Always-On Display (smartphones; Samsung)
AOD Alcohol and Other Drugs
90 more rows
How do I use AOD?
Open the Always-on Display menu either via quick settings or via the Settings menu. Then, choose your preferred Always on Display settings. Tap to show for 10 seconds: This is the default setting. When it’s activated, you must tap the screen to make your AOD appear for 10 seconds.
What does 4R70W stand for?
wide gear ratio
This means you don’t have to compromise between streetability and performance. Although unable to in its factory configuration, it is possible to modify the valve body to achieve converter clutch lockup in 1st gear. 4R70W (wide gear ratio) offers all of the above with lower 1st and 2nd gear to aid acceleration.
What is Ford overdrive?
Overdrive is the fifth gear of the transmission, the only gear that spins the output shaft faster than the input shaft. The overdrive cancel button on the end of the shifter stalk prevents the transmission from shifting into 5th gear (OD) and also commands engine braking in 4th gear (D).
Where do I find my Ford transmission code?
Look for the front rail of the trans case where you should find the VIN. It could also be along the front rail. Find the transmission ID tag on the top surface of the transmission or under a servo bolts on the transmission.
How do I identify a Ford transmission?
How to Identify Ford Transmissions
Take a picture of the transmission.
Measure the distance from the bellhousing to the rear of the transmission.
Look at the transmission pan and note the shape and the number of bolts.
Find the year of the vehicle the transmission came from.
How many gears are in a C4 transmission?
three
The Ford C4 is a three-speed, medium-duty automatic transmission introduced on 1964 model year vehicles and produced through 1981. The C4 was designed to be a lighter and more simple replacement for the original Ford-O-Matic two speed transmission being used in smaller, less powerful cars.
Ford C4 transmission.
C4/C5
Overview
Successor AOD
7 more rows
How many gears does a FMX transmission have?
three
The FMX is a standalone cast-iron three-speed automatic that was in production in various forms beginning in 1950.
What does a T5 transmission come in?
There are two basic types of T5 transmissions—the original T-5 STD (Non-World Class or NWC) and the World Class T5 (WC).
How much does a C6 transmission weight?
Thanks to these cutting-edge materials (for the 1960’s), the dry weight of a C6 transmission is 140 lbs, plus 30 lbs for the torque convertor. It requires 7-quarts of Type FA transmission fluid with the stock pan, plus an additional 2–4 quarts for the torque converter.
How many quarts does a Ford AOD hold?
12 quarts
Earlier Fords used type FA fluid, but the AOD requires 12 quarts of Mercon V fluid to fill the transmission and torque converter.
